The techniques of post and beam construction
The post and beam construction is a framework where there is a use of timbers in both vertical and the horizontal position. The horizontal timbers are known as the beams and those that remain upright are the posts. The joints that are used in this kind of construction are the tenon and the mortise joints. The post and beam construction is being used from centuries and is still relevant in the modern times even when so much technological advancement has occurred in the field of construction and architecture. The structures that use this framework are comparatively stronger and also have a visual appeal which makes it quite popular. The buildings which have been constructed using this technique have remained substantial and solid even when hundred years have passed.
About the post and beam construction
The post and beam construction is a specialized form of construction which really takes time and requires specialized carpentry skills. This is because the carving of the joint is a time consuming and difficult process which requires real technique. The tenon and the mortise have to be carved out in order to join the timbers. The mortise is the hole which is made in order to receive the tenon inside it. The shape of the hole is square. Sometimes in order to make the task comparatively easier in the post and beam construction, a hole is bored through the joint and a wooden dowel is passed inside this hole. This dowel holds the joint together. In such a scenario there is no longer the need for metal fasteners or nails.
Evolution of thepost and beam construction
In the earlier times in thepost and beam construction the timbers were left exposed on both the ends, i.e. on the upper as well as the lower ends. Lighter material for building is filled up in the area between the beams and the posts. It is possible to do this since this area does not support the weight of the whole building. In the modern age the exterior building wall covers up the timbers of the post and beam construction so that they do not remain exposed. However the interior parts do remains so. It is very much possible to reverse this situation so the while the interior part of the timbers gets covered up by the construction material and the outer part remains exposed. In both the conditions the strength of the overall structure does not get compromised.
The advantages of thepost and beam construction
If there is time to spare then there can be nothing better than thepost and beam construction. It is the timber frame that takes on the whole weight of the building which is constructed. There is to specific location for the interior walls and it is the choice of the builder to build these walls based on the layout of the floor. This type of post and beam construction goes well for both large structures as well as smaller houses or structures such as your tool shed, without any problems.